User Tools

Site Tools


pi:gpio

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

pi:gpio [2020/08/02 07:54] (current)
els created
Line 1: Line 1:
 +GPIO default state can be configured by /​boot/​config.txt as described on official [[https://​www.raspberrypi.org/​documentation/​configuration/​config-txt/​gpio.md|raspberrypi site]].
 +
 +As described there you can add lines with following syntax:
 +<​code>​gpio=<​pin>​=<​mode>,<​state></​code>​
 +
 +^ Section ^ Values ^ Description ^
 +| pin | 9 / 7-9 | Pinnumber or range to configure |
 +| mode | ip / op | Input / Output |
 +| state | dh / dl | For Output -> Drive High/Low |
 +| state | pu / pd | Pull Up/Down |
  
pi/gpio.txt ยท Last modified: 2020/08/02 07:54 by els